Welding gloves are an essential tool for anyone who welds or works in any industrial setting. They protect hands from extreme heat and friction, but that protection comes at a price. The grease and oil that the gloves create as they work to cause them to get dirty very quickly. How can you clean welding gloves? In this article, we will discuss eight key steps to keeping your welding gloves spotless!
8 Step: How to Clean Welding Gloves
Welding gloves can be a blessing and curse for welders. They protect our hands from the heat of welding, but they also get dirty quickly when we are working with metal all day long. Therefore, it’s important to keep them clean so as not to contract any infection or illness while you’re on the job site. Here is how to properly clean your welding gloves without damaging them!
- Read Cleaning Notes from Manufacturer
Read the manufacturer’s instructions carefully before you start to clean your welding gloves. How often should they be cleaned? What type of material are they made from, and how sensitive is it to certain types of cleaners? How will you know that your cleaning process was successful, or if you missed any steps in the directions given by the company? These are all questions that need to be answered before starting a project like this.
- Wash With Cold Water And Saddle Soap
It’s important to wash your gloves with cold water and saddle soap. The best way to do this is by hand, but if you don’t have the time or patience for that, use a washing machine on its gentle cycle. If you are using a washing machine, be sure to air dry them afterward outside of direct sunlight so they will last longer!
- Clean Inside And Out With A Soap-Free Rinse Step
After cleaning out the excess oils and grease from inside your gloves with clean water (be careful not to overdo it), rinse them off thoroughly to make sure no residues remain. Some gloves need this step more than others due to their material composition; always follow manufacturer instructions carefully!
- Wipe Out the Inner Lining
You can also clean out your gloves by wiping down any remaining residue from inside the lining. How you do this will vary based on what type of glove it is, so always read instructions as they come with each pair!
- Use A Mild Detergent To Clean Gloves Without Leather Trim
If your welding gloves are not leather-trinkety (meaning there isn’t a separate outer layer), use mild detergents to dish them and make sure no oils remain stuck in the seams or on surfaces that it could damage if left alone for too long. Always test first before going full force!
- Hang Them To Dry
After washing and rinsing your gloves, let them hang dry by hanging upside down. How long they need to be left this way will depend on the type of glove and what materials are in them – always refer back to manufacturer instructions for answers!
- Clean The Outer Lining Using A Soap-Free Rinse Step
Again, if you are cleaning a leather outer layer (not just an inner lining), make sure no grease or oils are remaining to damage it further. The same steps apply: read instructions carefully before using any detergent at all!
- Apply A Leather Conditioner
If you have a leather outer layer, be sure to apply some conditioner to keep it from drying out and cracking. How often will it depend on the type or frequency with which your gloves are used; always refer back to manufacturer instructions for more info!
Last Words
Be sure to clean your welding gloves after each use. You can do this in many ways, but the best way is by using a mild soap and water mixture. If you have any stubborn stains or dirt on them, scrub with dishwashing liquid first before dipping in water for one minute at a time until they’re cleaned. Then, rinse thoroughly and let dry completely before storing away from other clothes not to contaminate them with oil residue. Remember to follow these tips if you want your equipment to last longer!
