The installation of a frameless glass shower door is one of the most common bathroom remodeling trends. As it has a sleek and tidy appearance, you must become acquainted with the various architectural elements before beginning the project. Here are a few tips for designing your bathroom with frameless shower doors.
Benefits of Frameless Shower Doors
Shower doors with no frames are made of tempered glass panels. They do not need any metal reinforcement, unlike framed glass shower doors. They have a fresh, sleek look that many buyers enjoy.
Frameless doors are, without a doubt, the trendier alternative in most consumers’ thoughts right now. Homeowners use a frameless shower door for the following reasons:
Plenty of Designs
You can choose frameless glass shower doors from a wide range of designs. There are several models, sizes, and combinations available. You may add metal hinges and handles to frameless doors, but they are not necessary.
Various Motions
The hinges on your frameless shower door enable you to open and close the door in both directions. It is a significant improvement over framed shower doors, which have little opening capabilities.
Tips to Make the Most out of the Process
1. Focussing on Angles
It’s crucial to pay attention to certain angles when mounting a frameless shower door. In particular, you must use various angles such as 90°, 135°, or 180° to build the shower. What is the significance of this? Since most shower hardware is made especially for these angles, you can be assured that the system would be economical and functional.
2. Support the Shower
It’s also crucial to think of the service your shower would get after it’s mounted. Make sure the wall you chose has a solid enough studying frame to bear the load of the door and the walls. A single 2×4 is usually sufficient, but a double 2×4 is the best choice.
3. Type of Hinges
A hinge is required to allow the door to open and close. Updating a hinge on a glass door, particularly a frameless one, is a very different experience than installing a hinge on a stable door. The hinge should be able to accommodate the door’s weight while still allowing it to turn smoothly.
Panel-to-wall hinges, pivot hinges, and glass-to-glass hinges are the three styles of hinges available for your frameless shower door. Ask your vendor about which choice is better for you. Each hinge has its set of advantages and disadvantages.
4. Add Shower Seat
Some frameless glass shower doors have a bench, but if yours do, make sure it’s slanted at a 5-degree angle toward the drain. Water from the tub will collect on the seat if it doesn’t. You like it to go straight into the drain instead.
5. Be Careful With Tiles
Even though glass tiles look stunning in a frameless glass shower, there are a few things to keep in mind. It’s necessary to avoid installing hardware into the tile, such as clips or door hinges, while choosing this option, for example.
These glass tiles are sturdy but not enough to support the weight of the door or the walls. The tiles are likely to crack, delaying the project and potentially adding a significant amount of money in glass repairs even after installation.
In The End
There are only a few things to consider before installing a frameless shower in your bathroom. Though your contractor would be a valuable resource, it won’t hurt to have this knowledge in mind as well.
