How to take care of your floor?

Home Decor

Written by:

Floor cleaning should be done regularly, in your house there are some areas, such as kitchen, dining areas, bathroom, entrance and hallways. These areas should be swept or vacuumed everyone to three days, and you should mop once in a week. Moping is essential to keep your floor clean. In every house regularly cleaning is critical for maintaining the life of the flooring. If you do this, it will remove the dust and grit and helps to not damage the floor. You should also do regular moping when it is needed.

Most of the people imagine that they know how to mop a floor, but there are some minor mistakes often made, to neglect those use a second bucket for rinse water. But it is common that people don’t use two buckets, they use only one bucket and rinse the mop in the same water used to wash the floor. The best method is to use a two bucket; one bucket for detergent and water and another one is for clean rinse water. You can also use a bucket of clean water and sink basin with fresh water to rinse.  Also, keep in mind that processes might vary if you’re dealing with commercial cleaning or janitorial services. Cleaning products are also different than those that are used regularly at home. There are a couple of excellent concrete floor cleaning companies in the Waco, TX area worth counting on when dealing with these tasks in such circumstances. 

Different ways of cleaning the floor: – 

Dust Mopping:  If you do regular cleaning with the dust mop, it helps to clean away the large elements of surface dirt. It helps to remove the surface dirt and dust, so then it doesn’t become embedded into the finish, and it is causing damage to the finish. Make sure that you don’t use the oil-based dust mop treatments as it can leave a haze on the floor that can attract even more dirt. for better results, keep in mind that the mop is lean right from the start.  

Damp Mopping: The damp mopping helps to remove the particulates and oil soil also. It also gives good finishing and helps to prevent the floor’s finish from darkening or yellowish substances from embedded soil. But make sure that use a clean mop head, start with a clean water and follow the instruction recommended by the manufacturer’s dilution ratio for the floor cleaning product. If you use wet mops, the floor will become wet, and it will leave the soil behind. There are some products recommend rinsing with clean water. considering that using a no-rinse cleaner, which will help to eliminate the extra rinse step.

Auto Scrubbing: It may be not feasible for all facilities, but if you are using this type of equipment can be effective and more efficient. The scrubbing is better than the mopping and it removes the soil in a better way. Keep in your mind that you follow the steps recommended by the manufacturers and choose the appropriate pad for cleaning. Commercial floor scrubbers will provide an efficient cleaning solution for your small or large tile or concrete floors. Keep in your mind that you follow the steps recommended by the manufacturers and choose the appropriate pad for cleaning.  

Low-speed buffing: On the floor, the low-speed buffing helps it to repair the finish to a smooth shine and delay the need for a recoat. It a great option for you, because burnisher is costly. If you want a good finishing to your floor, use a spray buff to aid repair. Choose the pad appropriately for spray buffing, and a mop-on maintainer for efficiency. Before you do this all, clean your floor first. If there is dirt on the floor, by buffer pad you can clean it.

High-Speed Burnishing: High-speed burnishing is much more efficient than low-speed burnishing. It helps to repair the finish to the smooth shine, and it delays the need for a recoat. You need to choose an appropriate pad that matches your burnish frequency.

Clean Ceramic and Porcelain Tile Floors 

Ceramic and porcelain tiles are incredibly durable, and a few steps for cleaning it can keep these types of floor looks bright.

Here are some steps to clean a ceramic and porcelain tile: –

Clean up loose debris: To keep your tiles clean use a sweep or vacuum them regularly, so to keep them from getting dull. The Ceramic tiles may be resistant to dirt, but sand and grit can get dull with the glazed surfaces.

Choose the right floor mop: To clean your tiles take a mild detergent and clean water using a rag mop rather than a sponge mop. the disadvantage of taking the sponge mop it tends to push the dirty water into the ground lines, so make it harder to clean. Make sure to change the water frequently while mopping, the best mop for cleaning the tiles is chamois type or rag mop for the better result.

Look for the tiles stain: If you are cleaning it and you find a discoloration, first try to determine what type of substance made up of the stain. Then use the appropriate cleaner for the stain.

Soap residue: while cleaning your tiles, when it looks hazy even after cleaning, then you might be dealing with the soap residue. You can try a homemade cleaner with a mild acid, like fresh lemon juice on ceramic or porcelain tiles but don’t use it on stone tiles. Dry the tiles: To dry the tiles directly don’t air-dry as the sitting water will form spots. Take a lint-free clean dry cloth immediately after washing and take care of your floor with proper cleaning.

(Visited 88 times, 1 visits today)